USC-MS10TA G1" Mechanical Balancing Valve 8-30LPM

### Flow Meter (Balancing Valves) USC - MS10TA #### I. Purpose The flow meter (balancing valve) with direct flow indication can accurately balance and determine the most suitable efficiency of the system, helping to reduce energy waste and quickly promote and circulate through hot gas and air conditions. It is applicable to water with anti - corrosion and anti - coagulation additives, hot water, cold water, and potable water. #### II. Features 1. Precise and rapid balancing without the need for pictorial formats and measuring devices. 2. The flow rate is directly displayed in L/min. 3. Adjust the flow rate using the adjustment scale. 4. The connection range meets the system requirements. #### III. Technical Parameters 1. Model: USC-MS10TA 2. Maximum operating temperature: 110℃ 3. Maximum operating pressure: 1Mpa (10bar) 4. Measuring range: 8 - 30L/min 5. Measurement accuracy: ±10% of the upper limit value of the measuring range 6. Connection: Inlet G1, Outlet Rp1 #### IV. Installation and Use To ensure the correct flow direction, the balancing valve must be installed in a vertical, horizontal, or parallel position to the pipeline. For flow measurement, adjust the screw to the required flow rate, and the scale where the float is located is the measured flow rate.